Makeblock Starter Robot Kit V2.0 With Electronics

  • Brand: Makeblock
  • Product Code: RB-13K112
  • Availability: Pre-Order
  • $137.30

Tags: Robotics Kits, Makeblock, Humanoid Robots, Beginner Robotic Kits, Tracked Robots, AS-6DOF Biped Robot, ALSRobotBase, Sparkfun, Pololu, Arduino, Robot, Microcontroller, Arduino Kits, Raspberry Pi, Banana Pi,

Starter Robot Kit(With Electronics)V2.0 is the improvement version of Starter Robot Kit(With Electronics). Improvements come next:

Improvements List:

  • Me BaseBoard V1.0 instead of previous Meduino V1.0 and Me BaseShield V2.0. Reduce Size and easier to users.
  • 2 Base Brackets instead of previous Arduino Acrylic Box and Battery Bracket. Base Bracket is a multi-purpose bracket which can use for Meduino V1.0, Me BaseBoard V1.0, Battery Holder, and even Raspberry Pi.
  • Micro USB cable instead of previous USB A-Male to B-Male Cable.
  • Adding New colorized instruction book. The instruction book is easy to understand and even a kid can enjoy building a robot by following it.

This Kit contains mechanical parts and electronic modules for you to start exploring the robot world, it can be used to build  a robot tank or a three-wheel robot car.

With the following electronic modules :  Me Baseboard V1.0, ultrasonic ranger sensor, IR remote controller and IR receiver.An IR contrtol robot or an ultrasonic obstacle-avoiding robot can be build. The Me series electronic modules are easy-to-use, very friendly to beginners.


  • Strong aluminum extrusion parts, corrosion resistant(long time to shelve with barely rusting) and beautiful appearance(blue or gold)
  • Used to build a robot tank or a three-wheel robot car,the only limit is your imagination!
  • 2-wheel drive moving platform
  • Tracked vehicle platform
  • Me BaseBoard V1.0, ultrasonic ranger sensor, IR remote controller and IR receiver included

Packing List:

  • 1 x Beam 0824-96
  • 16 x Socket Cap Screw M4x8
  • 12 x Plastic Rivet R4060
  • 1 x Beam 0824-128
  • 24 x Socket Cap Screw M4x14
  • 6 x Plastic Rivet R4100
  • 2 x Beam 0824-144
  • 16 x Nut M4
  • 30 x Plastic Ring 4x7x2mm
  • 1 x Bracket 3x3
  • 1 x Nut M8
  • 2 x BaseBracket
  • 1 x Plate 3x6
  • 8 x Countersunk Screw M3x8
  • 1 x Battery Holder for (6)AA
  • 1 x Bracket P3
  • 8 x Headless Set Screw M3x5
  • 1 x Me-Baseboard
  • 1 x Caster Wheel
  • 40 x Track Axle
  • 1 x Me-Ultrasonic Sensor
  • 2 x DC Motor-25
  • 2 x Threaded Shaft 4x39mm
  • 1 x Me-IR Receiver
  • 2 x DC Motor-25 Bracket
  • 2 x Shaft Collar 4mm
  • 1 xMe-IR Remote Controller
  • 2 x Shaft Connector-4mm
  • 4 x Flange Bearing 4x8x3mm
  • 1 x 6P6C RJ25 cable-20cm
  • 4 x Timing Pulley 90T
  • 1 x HEX Screwdriver 3mm
  • 1 x 6P6C RJ25 cable-35cm
  • 2 x Tyre 68.5x22mm
  • 1 x Cross Screwdriver 3mm
  • 1 x Micro USB cable
  • 40 x Track
  • 2 x HEX Allen Key 1.5mm
  • 1 x Wrench 7mm
  • 6 x Brass Stud M4*20

Note:The battery of IR Remote Controller will be taken to assure safe transport, you may need to buy it by yourself. The battery size is CR2025. Sorry about the inconvenience.

Write a review

Please login or register to review