ALSRobot Getting Started with Banana Pi Kit

  • Brand: ALSRobot
  • Product Code: RB-13K129
  • Availability: Out Of Stock
  • $91.30

Tags: Microcontroller, Banana Pi Kit, RobotBase Getting Started with Banana Pi Kit, Raspberry Pi, Picoboard, Robotics

Description:
This is a DIY Kit. Used Banana Pi M1 hardware platform as the the foundation, It makes a great school project, you can build your own Linux server or just about anything you can think of with this kit.Banana PI M1 is the open source hardware platform which published to assistant the Elastos.org open source OS, Banana PI M1 is the dual core Android 4.2 product which more better than the Raspberry Pi.
Banana Pi M1 series run Android,Debian linux,Ubuntu linux, Raspberry Pi imange and cubieboard imange. Elastos coordinate multi CUP to from the family cloud entirnment which based on the"software/hardware service"Upon request you can choose from one of the following Operating System: Lubuntu, Kali Linux, Open Suse, Android 4.2.2, Fedora, ArchLinux, Bananian, Kano, Nos,  Gentoo and LeMadia V1.0 (XBMC Gotham).

Hardware specification:

  • CPU:A20 ARM® Cortex™-A7 Dual-Core
  • GPU:ARM Mali400MP2 Complies with OpenGL ES 2.0/1.1
  • Memory (SDRAM):1GB DDR3 (shared with GPU)
  • Onboard Storage:SD (Max. 64GB) / MMC card slot UP to 2T on SATA disk
  • Onboard Network:10/100/1000 Ethernet RJ45 (optional USB WIFI Dongle)
  • Camera Input:A CSI input connector allows for the connection of a designed camera module
  • Sound Input:Mic
  • Video Outputs:HDMI, CVBS , LVDS/RGB
  • Audio Output:3.5 mm Jack and HDMI
  • Power Source:5 volt via MicroUSB(DC In Only) and/or MicroUSB (OTG)
  • USB 2.0 Ports:2 (direct from Allwinner A20 chip)
  • Buttons:Reset button: Next to MicroUSB connector
  •                 Power button: Next to Reset button
  •                 UBoot button (optional): Behind HDMI connector
  • GPIO(2X13) pin:GPIO,UART,I2C bus,SPI bus with two chip selects,CAN bus,ADC,PWM,+3.3v,+5v,ground.
  • LED:Power Status LED (Red)
  •           Ethernet Status LED (Blue)
  •           User Define LED (Green)
  • Remote:IR
  • Supported OS:Android,Android 4.4,Debian,Ubuntu,Raspberry Pi
  • Supported Apps:Scratch

Interface definition:

  • Product size:92 mm × 60mm
  • Weight:48g

Use Method:

  • Download the relevant Image file
  • Make your card
  • Format the SD card
  • Unzip the download file to get the OS image
  • Write the image file to the SD card
  • Insert the made SD start card
  • Connect with the display screen
  • Connect with the USB power wire
  • Open the system
  • GPIO define

Packing List:

  • 1 x Banana Pi Controller
  • 1 x Mini Keyboard
  • 1 x 5V/2A Power Adapter
  • 1 x SanDisk SD 16G Memory Card
  • 1 x HDMI to HDMI Male Lead Cable
  • 1 x AV Audio Video Cable
  • 1 x AMP Network Cable
  • 1 x Hard Disk Cable for Banana Pi
  • 1 x Heat Sink for Banana Pi
  • 1 x Acrylic Cover for the Banana Pi-Clear
  • 1 x Packing Box

Note: This is a kit and needs assembly, you will need some basic tools like a phillip screwdriver and a needle nose pair of pliers. You will also need a small tube of thermal compound or double sided thermal tape to affix the heat-sink to the CPU and Dram chips.

Write a review

Please login or register to review