Arduino Ethernet Shield 2 without PoE
- Brand: Arduino
- Product Code: RB-01C116
- Availability: 100
Tags: ALSRobot, Shield, POE, Ethernet Shield 2, Carduino Uno Rev3, Micro controller, Electronics, Arduino compatible, Arduino, Sparkfun, ALSRobot, Pololu, Makeblock, Seeed Studio, DFRobot, RobotShop, Adafruit, Raspberry Pi, Banana Pi, Microcontroller, Robotics Kit
The lastest Arduino Ethernet Shield 2 from ALSRobot allows an Arduino Board to connect to the internet. It is based on the Wiznet W5500 Ethernet chip.The Wiznet W5500 provides a network (IP) stack capable of both TCP and UDP. It supports up to eight simultaneous socket connections. Use the Ethernet library to write sketches that connect to the Internet using the Shield. The Ethernet Shield 2 connects to an Arduino Board using long wire-wrap headers extending through the Shield. This keeps the pin layout intact and allows another Shield to be stacked on top of it.
The R3 version brings to this shield the 1.0 standard pinout that consist in 4 additional pins: 2 of them placed near the AREF pin, that are used for TWI communication, and the other 2 are placed near the RESET pin. The IOREF pin is used to adapt the shield to the board on which is mounted. The last one is not connected and is reserved for future uses.
The latest revision of the shield adds a micro-SD card slot, which can be used to store files for serving over the network. It is compatible with the Arduino Duemilanove and Mega (using the Ethernet library). It also adds a separate power-over-Ethernet (PoE) module can be soldered to the board to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available.
- Need a Arduino board（Exclusive）
- Working Voltage:5V（ From Arduino Board）
- Ethernet Controller：W5500
- Connection Speed：10/100Mb
- COM Port:SPI
How to use your shield:
- Real time clock from NTC server
- Chat server
- Print your Ip address
- Monitor your sensors with a Web server