(SKU:RB-01C041)Arduino Uno-R3 SMD

From ALSRobot-Wki
Jump to: navigation, search


01C04101.jpg

Contents

Product overview

Arduino Uno SMD is a version of the Arduino Uno, but use atmega328p surface encapsulation and not into the encapsulation. It has 14 digital input/output pin (six of them can be used as a PWM output), 6 analog input, a 16 MHz crystal oscillator, a USB connection, power supply interface, an expansion head, and a reset button, only need to connect to the computer USB cable or dc power supply or use ac/dc adapter or battery can make it to work. UNO SMD is different from the previous version, it serial conversion not use FTDI USB serial port driver chip, it is to use the USB serial port conversion chip atmega8u2. "UNO" means a named Italy and mark the upcoming Arduino 1 release, will be reference for the Arduino UNO and 1 edition version, UNO is a series of new USB Arduino, reference model and the Arduino platform.

specification

  1. Main control chip:ATmega328
  2. Working voltage:5V
  3. DC interface input voltage (recommended)7-12v
  4. DC interface input voltage (limit)6-20v
  5. Digital I/O pins:14(6 for PWM output)
  6. analog input pin:6
  7. Digital pins output current:40MA
  8. 3.3 V output pin dc current:50MA
  9. Flash memory:32 KB flash (ATmega328) 0.5 KB of bootloader
  10. SRAM:2 KB SRAM(ATmega328)
  11. EEPROM:1 KB的EEPROM(ATmega328)
  12. crystals:16MHz

Method of use

1.Compile environment download (currently the latest version of the IDE is Arduino1.6.4)
Arduino IDE
2.Driver installation
Arduino Driver installation method
3.Program download
Program download method

Related to recommend

Arduino UNO SMD schematic
Arduino Introduction to learning suite

Personal tools
Namespaces

Variants
Actions
Navigation
Tools