(SKU:RB-03T027)XBee 2mW Wire Antenna - Series 2 (ZigBee Mesh)

From ALSRobot-Wki
Jump to: navigation, search
RB-03T027.jpg

Contents

overview

This is the XBee XB24-Z7WIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

These are essentially the same hardware as the older Series 2.5, but have updated firmware. They will work with Series 2.5 modules if you update the firmware through X-CTU.

Technical parameters and performance

  1. 3.3V @ 40mA
  2. 250kbps Max data rate
  3. 2mW output (+3dBm)
  4. 400ft (120m) range
  5. Built-in antenna
  6. Fully FCC certified
  7. 6 10-bit ADC input pins
  8. 8 digital IO pins
  9. 128-bit encryption
  10. Local or over-air configuration
  11. AT or API command set

using method

Pin definition

Connect Icon

Application Routine

Make wireless digital buttons

Assemble parts

RB-03T0271.jpg

Configuration wireless

RB-03T0272.jpg
  • +++
  • OK
  • ATRE
  • OK
  • ATID 3001
  • OK
  • ATMY 1
  • OK
  • ATDH 0
  • OK
  • ATDL 2
  • OK
  • ATD0 3
  • OK
  • ATIR 14
  • OK
  • ATPR 0
  • OK
  • ATID
  • 3001
  • ATMY
  • 1
  • ATDH
  • 0
  • ATDL
  • 2
  • ATD0
  • 3
  • ATIR
  • 14
  • ATPR
  • 0
  • ATWR
  • OK

Connecting circuit


Program effect

Wireless control electronics

Product recommendation

Buy address:XBee 2mW Wire Antenna - Series 2 (ZigBee Mesh)

Personal tools
Namespaces

Variants
Actions
Navigation
Tools