(SKU:RB-04M020)RS360 Micro DC Water Pump

From ALSRobot-Wki
Jump to: navigation, search
RB-04M020-RS360 Micro DC Water Pump (3)-800x600.jpg


Product introduction

This immersible pump can be used to water your plants, make a fountain or waterfall, and even change your fish tank water. It works quietly with the sound level under 30db.

The pump has a filter inside as well as a suction cup which can help stick it to smooth surfaces tightly.

Note: This pump is intended for use UNDER the water ONLY!.

Technical parameters and performance

  1. Power supply: DC12V
  2. Pumping head: 1m
  3. Power range: ≈3W

Methods of use

Required hardware

  1. Carduino UNO controller *1
  2. Sensor Shield v5.0 *1
  3. Relay Module *1
  4. Digital Push Button Module *1
  5. Water Pump *1
  6. 11.1V Lipo Battery

Connection method

Connect the relay module to Pin 11 of Carduino UNO controller and the button module to pin 7 as shown in the photo.


Sample Code

const int buttonPin = 7;     // 定义大按钮模块引脚
const int jidianqi =  11;      // 定义继电器模块引脚
int buttonState = 0;          
void setup() {
  pinMode(jidianqi, OUTPUT);      
  pinMode(buttonPin, INPUT);     
void loop(){
  buttonState = digitalRead(buttonPin);
  if (buttonState == LOW)
    digitalWrite(jidianqi, HIGH);  
    digitalWrite(jidianqi, HIGH); 

Application effect

The water pump draws water up when the button module is pushed; and it stop to pump on the contrary.

Video Tour

Shui liu liang 01.png
Shui wei tu rang 01.png

Products related to recommend


Purchase link

RS360 Micro DC Water Pump

Related products

Tamiya 70168 Double Gearbox Kit
L298 Dual H-Bridge Motor Driver

Related documents

Alsrobot Technical Forum

Personal tools